普通热轧钢材的合理洁净度及生产工艺探讨

钢凝固前、后生成的非金属夹杂物形貌和在钢中的分布特点不同,凝固前生成的夹杂物尺寸较大,在钢中随机分布,主要影响钢材的疲劳强度和延性等性能。凝固后生成的夹杂物尺寸小,主要在晶界富集析出。硅锰脱氧钢脱氧后钢液仍含有20×10-6以上溶解氧,这部分溶解氧在钢凝固后绝大多数会转变为微细的氧化物或氧硫化物夹杂。钢凝固后生成的夹杂物主要影响钢材的冲击韧性、韧-脆转换温度等性能。 对热轧长型材用普碳钢和低合金钢不必采用铁水脱硫预处理,对热轧钢板用普碳钢可采用铁水轻度脱硫预处理,对热轧钢板用低合金高强度钢可采用铁水脱硫预处理、炼钢过程抑制回硫和出钢过程脱硫的工艺。对超低硫低合金钢,在钢水炉外精炼脱硫处理过程钢-渣间须维持非常低的氧势,炉渣成分应控制在CaO:SiO2:Al2O3=60％～65％:4％-8％:30％～35％范围。 普通热轧长型材用钢脱氧后溶解氧含量可放宽至(30-50)×10-6,对中、厚板钢溶解氧含量必须较严格控制,最好采用铝脱氧将溶解氧控制在较低的水平,并将T[O]含量控制在50×10-6以下。采用降低炼钢终点钢水氧含量、出钢挡渣、CAS和CAB等较简易炉外精炼方法和防止铸坯夹渣等措施,能够生产满足普通热轧钢洁净度要求的高品质钢材。     

特钢长型材轧制技术新进展

在可持续发展原则指导下，强化控轧控冷、高精度轧制和改进表面与外形质量是当前特钢轧制技术发展的重点。     

Integration of batching and scheduling for hot rolling production in the steel industry

This paper investigates the hot rolling production scheduling problem in the steel industry and proposes a new mixed integer programming model for this problem based on the monolithic modeling strategy that integrates batching and scheduling. Using this strategy, the new model can simultaneously schedule multiple turns and simultaneously determine the production timetable of these turns in a global optimal view. A long-term tabu search heuristic using frequency-based memory is developed to obtain near-optimal solutions for this problem. Three kinds of speed-up strategies are developed to accelerate the search procedure of the proposed tabu search. A practical scheduling system combining the proposed mathematical model and the tabu search heuristic has been developed and tested on instances collected from practical production data. The experimental results show that the proposed mathematical model and the tabu search heuristic outperform both the current manual scheduling method and the traditional serial method.     

初轧机主传动系统扭转自激振动的稳定性

用变量摄动法对初轧机主传动系统扭转自激振动的稳定性进行了初步研究，讨论了稳定性条件，为初轧机打滑状态的诊断、监测提供了参考依据。     

Prevention of Lipid Oxidation in Precooked Turkey Meat Patties with Hot Packaging and Antioxidant Combinations

The effects of antioxidants or hot packaging and their combination on lipid oxidation were quite variable depending on the additives in turkey meat. The TBARS values of cooked patties were greatly affected by the degree of oxidation in the raw meat, and the effectiveness of antioxidants varied with added prooxidants. Ascorbate and free radical terminators had stronger antioxidant effects than iron chelators, and chelating iron alone could not eliminate lipid oxidation in either raw or cooked meat with added NaCl. The combination of hot packaging and antioxidants provided cooked patties with better protection from lipid oxidation than either treatment alone.     

新型引线热浸镀锡合金的研究

分析比较了进口锡与国产锡的成分和性能。设计出了新型的引线热浸镀锡合金，它具有较低的工作温度、优良的抗氧化性、流动性和可焊性。     

Intelligent Control of Consolidation and Solidification Processes

Intelligent processing of materials (IPM) deals with the integration of process models and in situ sensors into an intelligent process controller to achieve desired material properties. IPM-based control systems recently have been developed for both consolidation and solidification processes. This article explores the application of models based on the finite- element method (FEM) to develop process actuation systems, to design process schedules and component shape, and to develop a control model with which to control the process. The results in this article were presented at the AeroMat ’93 Advanced Aerospace Materials/Processes Conference and Exposition, Anaheim, CA, 7–10 June 1993     

S—135钢板热轧工艺研究

S—135钢板是水电站用高强耐磨不锈钢板,既要求强度高、韧性好,又要求耐磨、耐蚀性强,生产难度较大。除我厂外,目前国内尚无其它厂家能够生产这种钢板。该钢板在加热轧制,冷却过程中要解决很多技术难点。我们通过采用特殊的控制轧制和控制冷却工艺,很好地解决了诸多技术难点,使S—135钢板的开发研制取得了成功。为电站用高强度耐磨不锈钢生产提供了宝贵的经验,也为控制轧制及控制冷却技术在中板生产行业的应用起到了积极的推动作用。     

小城镇建设中的通风与供热水一体化研究

针对小城镇建设过程中的通风节能问题进行了研究,提出了通风供热水一体化的系统方案.该方案利用廉价、清洁的太阳能解决小城镇通风与供热水的问题,系统具有经济性、环保性、实用性,也为国家节能利用方面提供了新思路,为建设节约型社会做出新贡献,为解决城镇建设的能源消耗提供新的解决方案.     

高炉冲渣水在采暖工程中的应用

随着我国经济的迅速发展,能源消耗不断增加,节约能源、降低能源消耗势在必行,余热利用是节约能源的一个重要环节,冶金行业高炉冲渣水作为采暖热媒可以节约大量能源。